价格合适的镁牺牲阳极厂家

报价适宜的镁献身阳极供应商

报价适宜的镁献身阳极供应商Suitable magnesium sacrificial anode manufacturers
镁献身阳极阴极维护：是将电位更负的金属与被维护金属衔接，并处于同一电解质中，使该金属上的电子转移到被维护金属上去，使整个被维护金属处于一个较负的相同的电位下。
特色：该方法简便易行，不需要外加电源，很少发生腐蚀搅扰。
使用：维护小型或处于低土壤电阻率环境下（土壤电阻率小于100欧姆.米）的金属结构。如：城市管网、小型储罐等。能上能下，能进能出，唯才是举，唯能是用。The ability to go up and down, the ability to get in and the ability to go out are the only way to make use of talents.
一、辅佐阳极装置
1、辅佐阳极接线、密封
在土壤介质中，常用高硅铸铁做辅佐阳极。
高硅铸铁辅佐阳极密封过程：
（1）将辅佐阳极作业表面整理洁净，除掉阳极接头配件发浮绣，显露金属光泽。
（2）用铜焊或锡焊及螺栓衔接方法将导线接在阳极接头配件上。
（3）辅佐阳极与导线衔接处，应保证衔接结实。导电功能杰出。
（4）将固化剂和环氧树脂按份额分配均匀，在接头处涂改及灌封，避免接线处渗水，做好绝缘密封处理。待环氧树脂固化后，按操作规程装置辅佐阳极。
报价适宜的镁献身阳极供应商Suitable magnesium sacrificial anode manufacturers
二、镁阳极与管道焊接
铝热焊的文字说明
1、首要要把管道的防腐层损坏一块,和铝热模具巨细相同的长方形口
2、把镁阳极包上面的电缆线放在铝热焊模具下面的缺口处，在把模具放在管道上，模具盖翻开能看到电缆，将小铁片碗形朝上放在模具底部ft20985551
3、焊接分大包小包，先倒大包焊剂，在把小的引火粉均匀的倒在上面，顺便在模具焚烧口的边缘到点，然后把模具盖盖住
4、用点在磨具口焚烧，（焚烧时留意带手套，脸不要直视焚烧口，用钳子压住模具盖）瞬间点着，电缆线与管道焊接成一个铜疙瘩，焊接的十分结实
5、然后用补伤棒将创伤填平能上能下，能进能出，唯才是举，唯能是用。The ability to go up and down, the ability to get in and the ability to go out are the only way to make use of talents.
6、用火加热补伤片，让补伤片紧贴上口，将创伤补住...
7、Two, magnesium anode and pipe welding
8、Description of thermit welding
9、1, first of all, destroy the anticorrosion layer of the pipeline, the same rectangle as the size of the aluminum hot mold.
10、2. The cable above the magnesium anode is placed under the gap under the aluminum heat welding mold. The mold is placed on the pipe. The die cover opens to see the cable, and the small iron sheet is placed upwards in the bottom of the mold.
11、3, the welding is divided into large package, first pour a large package of flux, in the small fire powder even on the top, by the way the edge of the mold point fire mouth to the point, and then cover the mold cover.
12、4. With the ignition of a point gun at the mouth of the grinding tool, (with the gloves on the ignition, the face not to look at the point of the fire, the lid is pressed with the pliers), it ignites instantaneously. The cable and the pipe are welded into a copper bump, and the welding is very strong.
13、5. Then fill the wound with a wound stick
14、6, use fire to heat up the wound piece, let the wound piece close to the mouth, fill the wound.焦作市立博轻合金股份有限公司